Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

Cutting Tool, Grinding Tool and Measurement Tool

Sort by:
Showing 1 - 90 of 9,310 Results
Show: 30 60 90
VIEW: Grid View List View
Sharpening Stone
NANIWA (Naniwa Abrasive Mfg)
5.00(2)
21.28 - 26.20 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
King finishing abrasive
King Stone
5.00(9)
53.79 SGD
ADD TO CART
Purpose: For superfinishing of inner cutlery and stainless steel cutlery.For cooking knife, knives, carving knives, planes, chisels, scissors, electric Planer knives, and other precision blades., For superfinishing of inner cutlery and stainless steel cutlery.For cooking knife, knives, carving knives, planes, chisels, scissors, electric Planer knives, and other precision blades., TKG Part Number (2015): 5-0289-2701, Dimension (mm): 210x73x22, 210x73x22, Grain Size: 6000, 6000, Material: Special abrasive materials, Accessories: exclusive use stand, Exclusive stand
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Sharpening Stone,  "King Deluxe"
King Stone
28.05 - 33.42 SGD
Purpose: Rough sharpening (300 grain) for: planes, chisel and variety of knives Fot medium finishing (800 to 1,200 granularity) : for stainless steel knife, flick knife planers, chisels, kitchen knives, scissors, knives, and other precision blades, Rough sharpening (300 grain) for: planes, chisel and variety of knives Fot medium finishing (800 to 1,200 granularity) : for stainless steel knife, flick knife planers, chisels, kitchen knives, scissors, knives, and other precision blades, Material: special abrasive, Special abrasive materials
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Screw, Extractor Set
ESCO
4.67(3)
37.92 - 46.43 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Extractor > Set Products
Diamond Sharpener
H&H
3.00(1)
16.84 - 22.63 SGD
Width (mm): 15
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > File > Diamond File
Circle Cutter
TRUSCO
3.00(2)
52.90 SGD
ADD TO CART
Cutting Range (mm): 25 - 125, Dimension F (phi mm): 5.5, Dimension G(mm): Opposite side 7, Dimensions C (mm): 35, Dimensions B (mm): 11.5, Dimensions E (mm): 80, Dimensions D (mm): 37, Dimensions A (mm): 23, Shaft Diameter: Three groove 10mm, Weight (g): 191, Material: Body: S45C blade part: SKH-51 drill part: high-speed steel, Accessories: Iron for blade (TCC-125KA) x1 sheet, 3mm hex wrench
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > for Concrete > Concrete Drill
Diamond Paste
MonotaRO
13.53 - 15.16 SGD
Oil Base or Water Base: water-based
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Abrasive Material > Diamond Polishing
Sharpening Stone Board
GISUKE
3.00(8)
18.59 SGD
Purpose: Resharpening of the various cutting tools and knives. Rough sharpening for # 150: ideal for a significant revision of the blade when necessary. Mid sharpening for # 400: ideal for small nicks or sharpening in the edge adjustment. Mid sharpening for # 1000, Resharpening of the various cutting tools and knives. Rough sharpening for # 150: ideal for a significant revision of the blade when necessary. Mid sharpening for # 400: ideal for small nicks or sharpening in the edge adjustment. Mid sharpening for # 1000: perfect for everyday care and resharpening. Grinding / sharpening for #150/#800: Knicked blade, blade adjustment, and resharpening can be done with just this one.
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Point tap (for general use) (EX-POT)
OSG
8.50 - 889.90 SGD
Chamfer Lcf: 5P
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap > Point Tap
Diamond Dressing Stone
Yamato Seitosho
5.00(2)
8.73 - 12.50 SGD
Dimension (Length L x Width W x Thickness) (mm): 100x20x20, 100x20x20
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Dresser
Waterproof sand paper
FUJI STAR (Sankyo-Rikagaku)
4.75(8)
67.99 - 119.90 SGD
Base Material: Cw, Cw, Abrasive Material: CC, CC
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Waterproof Paper
Double-Sided Diamond Wheel
SK-11
5.00(6)
54.13 SGD
Caution: Please sharpen it with applying water, Please sharpen it with applying water, Purpose: Available to grind ceramic cutlery ,carbide metal, hard cutlery etc(knives, chisel, lane etc), Available to grind ceramic cutlery ,carbide metal, hard cutlery etc(knives, chisel, lane etc), Grinding Stone Size (mm): 204x65x7, 204x65x7
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Diamond Stone
T-Slot Cutter
MonotaRO
3.17(6)
40.03 - 62.05 SGD
Purpose: For groove processing
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Cutting Off and Slot Processing > Cutter > T-Slot
Ceramic cutter
Work Finisher
4.44(9)
36.71 SGD
Cutting Edge Angle (degree): R30, Material (body): Plastic, Materials (Blade): Ceramics, Blade Thickness (mm): 1.5
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Chamfering and Deburring > Deburring > Cutter, File
Diamond Drill Bit
BOSCH
41.32 - 59.63 SGD
Effective Length (mm): 20, Overall Length (mm): 65, Compatible Models: Battery-powered drill battery-powered drill vibration (rotation mode)
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > for Concrete > Concrete Drill
Band Saw
Lenox
449.90 SGD
Thickness (mm): 0.9, Width (mm): 27, Length (mm): 2750
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Band Saw and Saw Blade > Band Saw > Endless Bandsaw
Drill Stand
OsakaSpirit
20.16 SGD
ADD TO CART
Purpose: For the management of cutting tools., For the management of cutting tools., Storage Size: 1.0 mm to 10mm(0.1 jump), 10.5 mm, 10.9 mm, 11 mm, 11.5 mm and 11.9 mm, 12 mm, 12.5 mm, 12.9 mm, 13 mm each one hole, Outer Diameter (phi mm): About 180, Weight (g): 240, Height (mm): Around 80, Material: Plastic
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > For Iron Works > Related Products
King Gold finishing abrasive
King Stone
109.90 SGD
ADD TO CART
Purpose: For planers, chisels, kitchen knives, scissors and other precision blades and super finishing last, For planers, chisels, kitchen knives, scissors and other precision blades and super finishing last, TKG Part Number (2015): 5-0289-2801, Dimension (mm): 210x73x22, 210x73x22, Grain Size: 8000, 8000, Material: special abrasive, Special abrasive materials
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Straight collet
NIKKEN
3.75(8)
35.05 - 109.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Collet > Straight Collet
General bit whetstone GC No. 1
Noritake
18.80 - 599.90 SGD
Bond: V81R, Abrasive Material: GC
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Grinder Grinding Wheel > Straight Grinding Wheel
Cutting Off Wheel, Free Cut, A Grinding Stone
Noritake
179.90 - 389.90 SGD
Maximum Operating Speed (m/min): 57, Abrasive Material: A
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Cutting Wheel > For Metal
Cup brush
Nishiki
5.00(2)
15.40 SGD
ADD TO CART
Metal Fittings Diameter (mm): 72, Grinding Wheel Diameter (phi mm): 100, Outer Diameter (phi mm): 75, Trim Length (mm): 20.0, Screw Diameter (mm): M10, Maximum Rotation Speed (min-1[r. p.m]): 12000, Material: Steel strand wire, Type: For AN type electric power tools
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Polishing Thunder grinder > Cup Brush
Sharpening Stone, King DX Large
King Stone
5.00(3)
42.89 SGD
ADD TO CART
Dimensions (Length L x Width W x Height H) (mm): 209x70x60, 209x70x60, Weight (g): 1700, 1700, Grain Size: 800, 800, Material: special abrasive, Special abrasive, Type: for semi finishing, Medium finish
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Screw Extractor
MonotaRO
3.14(7)
6.33 SGD
Caution: it may be broken due to unreasonable power it can not be used for heat-treated bolts, Purpose: To remove broken bolt
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Extractor > Individually
Hand tap Metric thread screws
YAMAWA
6.97 - 269.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap > Hand Tap
Sharpening Stone, "Sun Tiger"
Sun Tiger
5.00(1)
20.15 - 21.84 SGD
Dimension (mm): 205x50x25, 205x50x25
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Sanding Sponge, "KENMARON Super"
FUJI STAR (Sankyo-Rikagaku)
4.33(6)
35.56 - 36.24 SGD
Purpose: Step and gradation grinding, metal coated steps, surface treatment of the vehicle, Step and gradation grinding, metal coated steps, surface treatment of the vehicle, Dimension (mm): 150x230, 150x230
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Polishing Sheet With Abrasive Material
Accu Tapper
Big Daishowa Seiki
5.00(1)
529.90 - 949.90 SGD
Caution: Strip placed around retaining bar must be mechanical side. Cannot be used for left-hand thread tapping.
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Tooling Tupper
Hand tap drill set
Ishihashi Seiko
3.50(2)
219.90 SGD
ADD TO CART
Case Dimension (mm): About 95 x 190 x 50, Material: (High speed steel) drill /SKH TAP /SKS2 (ALLOY TOOL STEEL), Set Contents: hand tap middle and upper (M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5, M12x1.75) x1 by size (total 14pcs) drill for under holes (2.5mm, 3.3mm, 4.2mm, 5.0mm, 6.8mm, 8.5mm, 10.3mm) x1piece tap wrench (220mm) x1piece, TRUSCO Part Number: 302-2919, Specification: With steel case
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap, Drill Set
Zirconia Sanding Belt 100X915
DEERFOS
4.80(5)
62.47 - 77.77 SGD
Purpose: Heavy grinding of standard metals, such as stainless steel or iron., Abrasive Material: Zirconia, Dimension (mm): 100x915
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Polishing Thunder grinder > Belt Polishing
Step Drill Bit, Hss, Titanium Coated
MonotaRO
23.44 - 40.03 SGD
Purpose: Hole drilling, chamfering and deburring simultaneous processing Also, suitable for hole expansion and processing tears For drilling holes into the surface of a pipe For long hole drilling processing, Hole drilling, chamfering and deburring simultaneous processing Also, suitable for hole expansion and processing tears For drilling holes into the surface of a pipe For long hole drilling processing, Maximum Drilling Depth (mm): 5
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > For Iron Works > Step Drill (Bamboo Shoot Drill)
Coolant Hose
MonotaRO
12.42 - 18.65 SGD
Compatible Fluid: Oil, lubricating oil, acetone, gasoline, detergent, etc., Material: Polyacetal resin
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Coolant Supplies > Joint type > Member
Solid Steel For Drill Ok Coat
Okazaki Seiko
35.56 - 139.90 SGD
Helix Angle (Degree): 30, Point Angle (Degree): 140
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > For Iron Works > End Mill Shank Drill
General use bit whetstone WA white No. 1
Noritake
4.75(8)
9.85 - 719.90 SGD
Bond: V35R, Abrasive Material: WA white
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Grinder Grinding Wheel > Straight Grinding Wheel
Diamond core drill
TRUSCO
4.67(3)
35.91 - 69.69 SGD
Maximum Processing Thickness (mm): 30, Effective Length (mm): 35.5, Overall Length (mm): 65
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Hole Saw and Core Drill > Core Drill > Set Product
Cemented Carbide Blade Router Bit Set
RELIEF
36.52 - 139.90 SGD
Purpose: for electric router, electric trimmer, Shaft Diameter (phi mm): 6
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > for Woodworking > Woodworking Bit, Cutter
Gc/C Angular Combination Asahi Tiger Sign
Sun Tiger
24.53 SGD
ADD TO CART
Purpose: All edged tool such as kitchen knife, scissors, knife Grinding, cutting loose for fix, All edged tool such as kitchen knife, scissors, knife Grinding, cutting loose for fix, TKG Part Number (2015): 5-0289-1701, Dimension (mm): 205x50x25, 205x50x25, Grain Size: #120/#240, #120/#240, Specification: Double-sided type, Double-sided type
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Touch point
NIKKEN
4.33(3)
259.90 - 269.90 SGD
Tip Length (mm): 45, Red Light Diameter (mm): 16, Point Dimensions (mm): 10, Overall Length (mm): 157
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Core Position Measure
Steel wool
SK-11
7.49 - 8.14 SGD
Caution: Do not leave it with wetting., Do not leave it with wetting., Purpose: For removing rusts of machinery tools and paint and wax on the floor.finishing and polishing such as furniture, woodwork and metal, For removing rusts of machinery tools and paint and wax on the floor.finishing and polishing such as furniture, woodwork and metal, Overall Length (mm): 700, 700, Material: Steel wool
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Steel Wool
Spiral tap (for general metric threads) (EX-SFT)
OSG
8.80 - 1,109.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap > Spiral Tap
SKS Hand Tap
Hayasaka Mfg.
2.78 - 72.55 SGD
Material: SKS2
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap > Hand Tap
Oilstone, fine mesh (A angle)
Yamato Seitosho
4.00(3)
14.21 - 43.59 SGD
Grain Size: 320 (smooth), 320 (Fine mesh)
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Saw Blade
BAHCO
3.39 - 3.41 SGD
Overall Length (mm): 250
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Band Saw and Saw Blade > Saw blade > Hand Saw
Metal saw
Okazaki Seiko
4.00(1)
34.48 - 83.72 SGD
Hole Diameter d (phi mm): 25.4, Outside Diameter D (phi mm): 75
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Cutting Off and Slot Processing > Metal Slitting Saw
Rust Remover
CHUKYOKENMA
4.38(8)
6.54 SGD
Caution: Do not use on items with soft surfaces such as plastic, painted surfaces, etc., Do not use on items with soft surfaces such as plastic, painted surfaces, etc., Purpose: Surface finish of the wood handicraft, etc. Stain and rust removal of the surfaces of coated surfaces. Rust removal of knives, kitchen knives and blades. Stain removal of joints of tiles. Stain removal and improvement of hairlines of stainless steel and a, Surface finish of the wood handicraft, etc. Stain and rust removal of the surfaces of coated surfaces. Rust removal of knives, kitchen knives and blades. Stain removal of joints of tiles. Stain removal and improvement of hairlines of stainless steel and aluminum sashes. Rust removal of tricycles, bicycles, motorcycles, automobiles.
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Buffing and Polishing Conpounds > Compound
E type hole cutter (SKH51)
Omi Kogyo
5.00(2)
25.90 - 31.85 SGD
Purpose: Steel, galvanized steel, Tin plate, etc., Effective Length (Maximum Cutting Depth) (mm): 8, Drill Diameter (phi mm): 6, Shank Diameter (phi mm): 10(No.2), Effective Cutting Ability (mm): 1.6, Type: E, Material: Center drill: SKH51
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Hole Saw and Core Drill > Hole Saw > Set Product
Steel Wool, Pound Roll
BONSTAR
4.88(8)
13.95 - 28.34 SGD
Material: (iron) steel wool 100%, (Iron) steel wool 100%
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Steel Wool
Extractor combination (spiral type)
TRUSCO
1.00(1)
31.96 - 359.90 SGD
Purpose: To pull out broken bolts and pipes., Material: S45C
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Extractor > Set Products
File set 5 pieces set
TRUSCO
4.00(2)
48.48 - 66.13 SGD
Mass (g/set): 275, 275, Blade Length (mm): 110, 110, Overall Length (mm): 215, 215, Specification: With crude and another end cap
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > File > Set Files
Adjustable Thread Cutting Round Dies PF, Straight Pipe Use
OSG
62.05 - 109.90 SGD
Material: Alloy tool steel (SKS)
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Dies
GC grinding stone (No. 1)
KURE GRINDING WHEEL (Kure-Norton)
4.25(4)
19.21 - 279.90 SGD
Abrasive Material: GC
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Grinder Grinding Wheel > Straight Grinding Wheel
Metal Slitting Saws
MonotaRO
27.73 - 34.89 SGD
Purpose: For cutting and grooving of materials, Outer Diameter (phi mm): 75, Inner Diameter (phi mm): 25.4
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Cutting Off and Slot Processing > Metal Slitting Saw
Drill chuck
Yukiwa Seiko
55.01 - 219.90 SGD
Accessories: Chuck handle
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Chuck > Drill Chuck
Jet tap
Ishihashi Seiko
9.18 - 139.90 SGD
Purpose: For tapping machines
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap > Point Tap
T type ratchet tap holder
TRUSCO
5.00(1)
42.02 - 119.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Wrench, Handle
Buffing Compound Bar, Green
Koyo-Sha
4.57(7)
21.58 - 32.91 SGD
Purpose: Mirror finishing of metals in General, Mirror finishing of metals in General, Compatible Buff: sisal buff, cotton buff, felf buff, Sisal buff, Cotton buff, Felt buff, Process: finish polishing, Polished finish, Color: green, Green, Type: Solid abrasive material
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Buffing and Polishing Conpounds > Green Rounge
Bimetal hole saw
Nicotec
19.55 - 109.90 SGD
Purpose: Mild steel, iron, stainless steel plate, aluminum plate, plastics, wood etc, Drill Diameter (phi mm): 6, Effective Cutting Ability (mm): 3.2
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Hole Saw and Core Drill > Hole Saw > Set Product
Adjustable reamer
F. P. Tool
4.12(8)
81.49 - 539.90 SGD
Number of Blades: 6, Material: SKS
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Reamer > Adjustable Reamer
Tap handle
TRUSCO
2.33(3)
13.57 - 799.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Wrench, Handle
No.36 Adjustable Circle Cutter
Star-M
4.25(8)
47.26 SGD
ADD TO CART
Purpose: For drilling in down lights, tubes, ducts, etc., Size (mm): 30x120, Materials (Blade): High speed steel, Hole Drilling Depth (mm): One sided/25, both sides/50, Drill Diameter (phi mm): 8, Hole Diameter (phi mm): 30 - 120, Shaft Diameter (phi mm): 3 grooves 10, TRUSCO Part Number: 305-0025
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Hole Saw and Core Drill > Circle Cutter > Main Unit
Safety Cover
Star-M
5.00(1)
55.73 - 79.36 SGD
Socket Size (mm): (Freely cone) 10, Height (mm): 135, Shaft Diameter (phi mm): 10
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Hole Saw and Core Drill > Circle Cutter > Related Products
Mini Hole Saw
Shinto Kogyo
23.44 - 27.73 SGD
Shaft Diameter (phi mm): 6.35
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Hole Saw and Core Drill > Hole Saw > Set Product
Sanding Paper
RELIEF
3.67(3)
3.19 - 4.12 SGD
Purpose: For the surface finishe of wood, plywood, metal and the peeling of paint, varnish, rust, etc., Size (mm): 228x93, Base Material: Craft paper, Abrasive Material: G
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Polishing Thunder grinder > Sheet Type
Carbide straight bit
Dainissho
24.63 - 68.50 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > for Woodworking > Woodworking Bit, Cutter
Power Drill
WIDIN
28.68 - 93.12 SGD
Helix Angle (Degree): 30, Shank Diameter Tolerance: H6, Coating: TiALN, Point Angle (Degree): 140
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > For Iron Works > End Mill Shank Drill
Waterproof abrasive paper (one-sheet)
FUJI STAR (Sankyo-Rikagaku)
1.04 - 1.45 SGD
Base Material: Cw, Cw, Abrasive Material: CC, CC, Dimension (mm): 230x280, 230x280
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Waterproof Paper
Abrasive Sponge
ThreeM 3M
2.70 - 25.98 SGD
Purpose: Final polishing of wood furniture, etc. Metal painted skin polishing Paint film exfoliation work Hair line Stains from pottery etc., Final polishing of wood furniture, etc. Metal painted skin polishing Paint film exfoliation work Hair line Stains from pottery etc., Dimension (mm): 114x140, 114x140, Thickness (mm): 5, 5
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Polishing Sheet With Abrasive Material
Diamond Cutter
Noritake
5.00(1)
139.90 SGD
ADD TO CART
Diamond Layer Width (X)(mm): 4.5, Dimensions (inch): 4, Attached Ring Bore Diameter (phi mm): 15, Bore Diameter H (phi mm): 20, Diamond Layer Thickness (T) (mm): 18, Outside Diameter D (phi mm): 102, Compatible Power Tool: Portable power tools
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Diamond (CBN) cutter wheel > Cup Wheel
Abrasive Belt
MonotaRO
34.48 - 41.61 SGD
Abrasive Material: AA
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Polishing Thunder grinder > Belt Polishing
Cutting Machine Blade
Iwood
5.00(5)
44.44 - 74.68 SGD
Hole Diameter (phi mm): 20
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Circular Saw for Cutting Machine > Tip Saw
Taper pin reamer
Okazaki Seiko
4.20(5)
27.73 - 2,459.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Reamer > Taper Pin Reamer
Diamond Wheel Range
SK-11
4.67(3)
119.90 - 139.90 SGD
Purpose: From household knives to cemented carbide, stubborn blades can also be sharpened.(Kitchen knife, canna, knife, chisel etc), From household knives to cemented carbide, stubborn blades can also be sharpened.(Kitchen knife, canna, knife, chisel etc), Grinding Wheel Thickness (mm): About 1 (green), Dimensions (Vetical x Horizontal x Thickness) (mm): 200x75x15, 200x75x15, Material (Unit): Aluminum
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Diamond Stone
Base master gold
Big Daishowa Seiki
5.00(1)
599.90 SGD
ADD TO CART
Purpose: For electrically conducting cutting tools, workpiece and machine, Material (measuring surface): Ceramics, Battery Life (continuous use): 10, Batteries: SR44x2, Body Size (phi mm): 42.5, Measuring Plane (mm): phi14, Detection Method: Internal contact point method, Overall Height (mm): 50, Weight (kg): 0.24, Stroke (mm): 3, TRUSCO Part Number: 137-8678
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Core Position Measure
Stainless steel cut
Noritake
1.93 SGD
ADD TO CART
Purpose: Cutting of a lightweight stainless steel material (a pipe and a round bar) etc., Maximum Operating Speed (m/min): 72, Bond: BAF, Outer Diameter (phi mm): 100, Hardness: P, Hole Diameter (phi mm): 15, Abrasive Material: WA, Thickness (mm): 2, Grain Size: 36
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Cutting Wheel > For Metal
Extractor Set, Spiral Type
MonotaRO
21.41 SGD
ADD TO CART
Caution: it may be broken due to unreasonable power it can not be used for heat-treated bolts, it may be broken due to unreasonable power it can not be used for heat-treated bolts, Purpose: To remove broken bolt, To remove broken bolt, Hardness HRC: 46-50, Opposite Side Angle Dimensions (mm): Shank No.1:3.9 No.2:4.7 No.3:6.2 No.4:7.8 No.5:10.9, Pilot Hole Drill Dimensions: NO.1:5/64(2mm) NO.2:7/64(2.7mm) NO.3:5/32(4mm) NO.4:1/4(6mm) NO.5:19/64(7.5mm), Bolt Screw Dimensions: NO.1:1/8-1/4(3mm-6mm) NO.2:1/4-5/16(6mm-8mm) NO.3:5/16-7/16(8mm-11mm) NO.4:7/16-9/16(11mm-14mm) NO.5:9/16-3/4(14mm-18mm), Overall Length (mm): NO.1:54 NO.2:60 NO.3:69 NO.4:78 NO.5:84, Material: Chromium molybdenum (finishing of heat treating)
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Extractor > Set Products
Oil stone
CHUKYOKENMA
4.33(6)
14.21 - 42.72 SGD
Purpose: Uses many different metallic objects in its blades, so polishes and treats many non metal objects effectively and has a wide area of use, Uses many different metallic objects in its blades, so polishes and treats many non metal objects effectively and has a wide area of use, Abrasive Grain: A (brown alumina), A (brown alumina)
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Sharpening Stones
Nylon Abrasive Sheet
FUJI STAR (Sankyo-Rikagaku)
5.33 - 5.92 SGD
Purpose: For removing the scratches on plastics, metal and painted surfaces.for pre-finishing compound and polishing.for optical fiber endface, precious metal clay, metal mold polishing.For Specimen analysis, etc., For removing the scratches on plastics, metal and painted surfaces.for pre-finishing compound and polishing.for optical fiber endface, precious metal clay, metal mold polishing.For Specimen analysis, etc., Abrasive Material: WA, WA, Dimension (mm): 230x280, 230x280
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Polishing Sheet With Abrasive Material
ACCU Center, Precision Edge Finder
Big Daishowa Seiki
4.50(2)
94.40 - 119.90 SGD
Caution: It is not suitable for the use with the horizontal machine.
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Core Position Measure
Dry Sanding Paper
MonotaRO
2.55 - 2.82 SGD
Purpose: For metal coated surfaces, woodwork fabric, etc., For metal coated surfaces, woodwork fabric, etc., For metal coated surfaces, woodwork fabric, etc., For metal coated surfaces, woodwork fabric, etc., Abrasive Material: silicon carbide, Silicon carbide
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Dry Sanding Paper
Drill Press Vise
MonotaRO
139.90 - 179.90 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Vice > Main Unit
Steel Wool Roll Pad
BONSTAR
3.33 - 6.68 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Steel Wool
Portable Band Saw for General
Funasaw
1.60(5)
149.90 - 209.90 SGD
Caution: Not for stainless cutting, Width (mm): 13, Material: High carbon tool steel
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Band Saw and Saw Blade > Band Saw > Endless Bandsaw
Drill mill collet (YCC type standard class)
Yukiwa Seiko
62.05 - 82.78 SGD
Length L(mm): 28, Outside Diameter D (phi mm): 18
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Touring > Collet > Spring Collet
India
Norton
5.00(1)
20.98 - 68.77 SGD
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Whetstone > Oilstone
Fuji Glass Beads
Fuji MFG
36.68 SGD
Specific Gravity: True specific gravity / bulk specific gravity 1.6/2.5, Hardness: 6.5 (new Mohs) HV600 (Vickers hardness)
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Abrasive Material > Abrasive Shot and Grit for Blasting Machine
Automobile-tap dies set
WAZAMONO
4.83(6)
299.90 SGD
ADD TO CART
Caution: Case may be difrerent, Set Contents: Tap M3 x 0.5 and 3 x 0.6 M and M 4 x 0.7 and 4 x 0.75 M and M 5 x 0.8 and 5 x 0.9 M and 6 x 1.0 M and 7 x 1.0 M and M 8 x 1.25 and 9 x 1.25 M and 10 x 1.0 M and M 10 x 1.25 and M 10 x 1.5 and M 12 x 1.25 and M 12 x 1.5 and M 12 x 1.75 and M 14 x 1.5 /
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Tap, Dies > Tap and Dies Set
Super green
New Registon
58.94 - 149.90 SGD
Purpose: For grinding and light grinding, including chamfering, bead removing and fixing, of steel, stainless steel, aluminium and etc., Maximum Operating Speed (m/s [m/min]): 72[4300], Thickness (mm): 3
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Grinder Grinding Wheel > Flexible Wheel
HP-8448
ThreeM 3M
4.50(4)
55.73 SGD
ADD TO CART
Purpose: Fine finishing, Fine finishing, Grade: SF, SF, Structure of Abrasives: Nonwoven fabric, Non-woven fabric, Abrasive Material: S (silicon carbide), S (silicon carbide), Color: green, Green, Dimension (mm): 150x230, 150 x 230, Thickness (mm): around 10, About 10, Grain Size: 400, 400, TRUSCO Part Number: 126-6381, 126-6381
Category Cutting Tool, Grinding Tool and Measurement Tool > Abrasive > Hand Grinding > Polishing Sheet > Polishing Sheet With Abrasive Material
Wood Plug Cutter
Star-M
22.16 SGD
ADD TO CART
Purpose: Bog wood from same tree. For wood material., Appropriate Rotation Number (rotation/min): 3000 following, Shank Diameter (mm): Hexagonal axis 6.35, Usage Tool: Impact driver, electric drill, Overall Length (mm): 74, Dimension (mm): 9, Material: Ordinary steel
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Drill > for Woodworking > Drill for Woodworking
Hss Cutter
MonotaRO
13.92 - 43.72 SGD
Coating: TiN coating, Material: High-Vanadium Heiss (High speed steel) HSSE
Category Cutting Tool, Grinding Tool and Measurement Tool > Cutting Tool > Chamfering and Deburring > Chamfering Cutter > Cutter

1 2 3 4 5 6 7 8 9 10 ...104 Next